303 Stainless Steel Round Bar

Description

303 stainless steel is an austenitic free-cutting stainless steel wear and acid resistant steel. To improve the performance of this steel, no more than 0.60% molybdenum is added to the steel. It has good resistance to ablative corrosion and good resistance to cutting and burning.
Corrosion resistance. 303 stainless steel mechanical properties after annealing and stress relief, tensile strength 515 MPa, yield 205 MPa and elongation 40%.
Standard hardness of 303 stainless steel HRB90-100, HRC20-25, Note: HRB100 = HRC20

Equivalent Material of 303 Stainless Steel Round Bar

Grade Euronorm China GB Japanese JIS
No.
303 1.4305 Y1Cr18Ni9 SUS303

Standard Specification Of 303 Stainless Steel Round Bar

Diameter Cold Rolled Bright 3-25.4mm; Hot Rolled Black Bar 20-100mm
Length 4-9meter / piece
Surface CR: bright bar; HR: annealed
Finish Hot rolled round bar (HR), Cold rolled round bar (CR)
Form Round Bar

Composition Content Of 303 Stainless Steel Round Bar

Grade C Mn Si P S Cr Mo Ni N
303 Min.
Max.
≤0.15 ≤2.0 ≤1.00 ≤0.20 ≥0.15 17.00-19.00 / 8.00-10.00
  • Mechanical properties:
  • Tensile strength σb (MPa) : ≥520
  • Conditional yield strength σ0.2 (MPa) : ≥205
  • Elongation Δ5 (%) : ≥40
  • Section shrinkage ψ(%) : ≥50
  • Hardness: 187 hb or less;
  • 90 HRB or less;
  • 200 hv or less

CONTACT US

We welcome you to contact us for more information
about any of our products or services.